windsheild wipers have a mind of there own

atownhockey19 · September 23rd, 2006, 10:31 PM

so bacically they dont turn off when there suppose to...they turn on right...but they keep going for atleast 10-15 seconds after i turn them off...and they decide to turn off all the way up or half way up the window...

ozoneblue · September 24th, 2006, 05:55 AM

Try tighting the mounting bolts if that dosent work add a extra ground wire to the metal part of motor this is quite common

atownhockey19 · September 24th, 2006, 01:29 PM

i also read something about a cracked circut board or something i cant quite remember....either that or a lose soder joint...i will try your suggestion first rather than spend 50$ on the new circut board

cliffg8 · October 21st, 2006, 03:02 PM

Had that problem with mine. Found that the solder joints connecting the wire plug to the circuit board on the wiper motor were loose. Resoldering the joints fixd my problem.

atownhockey19 · December 19th, 2006, 01:37 PM

can you post up on how to do this???

like about where everything is...

September 23rd, 2006, 10:31 PM	#1 (permalink)
atownhockey19 Junior Member Join Date: Aug 2006 Posts: 15	windsheild wipers have a mind of there own so bacically they dont turn off when there suppose to...they turn on right...but they keep going for atleast 10-15 seconds after i turn them off...and they decide to turn off all the way up or half way up the window...

September 24th, 2006, 05:55 AM	#2 (permalink)
ozoneblue Registered User Join Date: Jun 2006 Posts: 503	W S wipers Try tighting the mounting bolts if that dosent work add a extra ground wire to the metal part of motor this is quite common

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
85 cutlass T-Top and door strips.	Joel n	Cutlass	1	October 9th, 2006 08:04 PM

September 24th, 2006, 01:29 PM	#3 (permalink)
atownhockey19 Junior Member Join Date: Aug 2006 Posts: 15	i also read something about a cracked circut board or something i cant quite remember....either that or a lose soder joint...i will try your suggestion first rather than spend 50$ on the new circut board

October 21st, 2006, 03:02 PM	#4 (permalink)
cliffg8 Junior Member Join Date: Sep 2006 Posts: 5	Had that problem with mine. Found that the solder joints connecting the wire plug to the circuit board on the wiper motor were loose. Resoldering the joints fixd my problem.

December 19th, 2006, 01:37 PM	#5 (permalink)
atownhockey19 Junior Member Join Date: Aug 2006 Posts: 15	can you post up on how to do this??? like about where everything is...