windsheild wipers have a mind of there own

atownhockey19 · 09-23-2006, 09:31 PM

so bacically they dont turn off when there suppose to...they turn on right...but they keep going for atleast 10-15 seconds after i turn them off...and they decide to turn off all the way up or half way up the window...

ozoneblue · 09-24-2006, 04:55 AM

Try tighting the mounting bolts if that dosent work add a extra ground wire to the metal part of motor this is quite common

atownhockey19 · 09-24-2006, 12:29 PM

i also read something about a cracked circut board or something i cant quite remember....either that or a lose soder joint...i will try your suggestion first rather than spend 50$ on the new circut board

cliffg8 · 10-21-2006, 02:02 PM

Had that problem with mine. Found that the solder joints connecting the wire plug to the circuit board on the wiper motor were loose. Resoldering the joints fixd my problem.

atownhockey19 · 12-19-2006, 12:37 PM

can you post up on how to do this???

like about where everything is...

09-23-2006, 09:31 PM	#1 (permalink)
atownhockey19 Junior Member Join Date: Aug 2006 Posts: 13	windsheild wipers have a mind of there own so bacically they dont turn off when there suppose to...they turn on right...but they keep going for atleast 10-15 seconds after i turn them off...and they decide to turn off all the way up or half way up the window...

09-24-2006, 04:55 AM	#2 (permalink)
ozoneblue Senior Member Join Date: Jun 2006 Posts: 404	W S wipers Try tighting the mounting bolts if that dosent work add a extra ground wire to the metal part of motor this is quite common

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
85 cutlass T-Top and door strips.	Joel n	Cutlass	2	10-10-2006 05:25 AM

09-24-2006, 12:29 PM	#3 (permalink)
atownhockey19 Junior Member Join Date: Aug 2006 Posts: 13	i also read something about a cracked circut board or something i cant quite remember....either that or a lose soder joint...i will try your suggestion first rather than spend 50$ on the new circut board

10-21-2006, 02:02 PM	#4 (permalink)
cliffg8 Junior Member Join Date: Sep 2006 Posts: 5	Had that problem with mine. Found that the solder joints connecting the wire plug to the circuit board on the wiper motor were loose. Resoldering the joints fixd my problem.

12-19-2006, 12:37 PM	#5 (permalink)
atownhockey19 Junior Member Join Date: Aug 2006 Posts: 13	can you post up on how to do this??? like about where everything is...