72 Cutlass Disc Conversion

jtsautos · July 11th, 2009, 05:35 PM

As far as I know I can get all the brake parts needed for a front disc conversion for my 72 Cutlass from Napa auto parts, except for the spindles, power brake booster and proportioning valve. Does anyone know where I can these last items in Ontario, Canada? Thanks.

Aceshigh · September 1st, 2009, 05:46 AM

http://www.classicperform.com/

http://www.abspowerbrake.com/

My442 · September 1st, 2009, 08:55 AM

Drum brake spindles will work with a small amonut of machining for the upper mount for the backing plate.

I do believe that they reproduce the spindles.

70 cutlass s · October 7th, 2009, 10:33 AM

You can get spindles from a junk yard that will work.

svnt442 · October 7th, 2009, 02:28 PM

You can get the booster at the parts store.

July 11th, 2009, 05:35 PM	#1 (permalink)
jtsautos Registered User Join Date: Jul 2009 Location: Holland Landing, ON, Canada Posts: 6	72 Cutlass Disc Conversion As far as I know I can get all the brake parts needed for a front disc conversion for my 72 Cutlass from Napa auto parts, except for the spindles, power brake booster and proportioning valve. Does anyone know where I can these last items in Ontario, Canada? Thanks.

September 1st, 2009, 05:46 AM	#2 (permalink)
Aceshigh Registered User Join Date: May 2009 Posts: 167	http://www.classicperform.com/ http://www.abspowerbrake.com/ __________________ 1970 Olds 442 Tribute Sherwood Green + Rocket 350 Olds VIN Decode

October 7th, 2009, 02:28 PM	#5 (permalink)
svnt442 Registered User Join Date: Jun 2009 Location: San Jose, CA Posts: 453	You can get the booster at the parts store. __________________ Randy 1970 442

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
72 Cutlass rear disc conversion	csouth	Brakes/Hydraulic Systems	7	June 10th, 2009 08:25 AM
65 Cutlass fron disc conversion	dingusboy	Cutlass	6	April 15th, 2009 11:52 AM
Disc brake conversion 72 Cutlass	JCervantes	Brakes/Hydraulic Systems	7	December 28th, 2008 08:39 PM
Disc brake conversion 69 cutlass	tarheeldoc	Brakes/Hydraulic Systems	0	November 5th, 2008 12:52 PM
Drum to Disc Conversion on 78 Cutlass	crazyiball	Cutlass	8	January 18th, 2007 07:40 PM

September 1st, 2009, 08:55 AM	#3 (permalink)
My442 Registered User Join Date: Feb 2009 Posts: 204	Drum brake spindles will work with a small amonut of machining for the upper mount for the backing plate. I do believe that they reproduce the spindles.

October 7th, 2009, 10:33 AM	#4 (permalink)
70 cutlass s Registered User Join Date: Sep 2009 Location: Elizabethtown,KY Posts: 240	You can get spindles from a junk yard that will work.