Front Bumper Alignment Issue

[#1CutlassSupreme]

Okay, here's where I make a comfession...

I bought a reproduction bumper...there I said it...

I live near Portland Oregon and the state EPA has shut down chrome platers that can handle large bumpers in the area so my only recourse was to buy a reproduction at this point.

I tried to install it on the car yesterday. When I look at it straight on however, it seems slightly out of alignment with the center of the stone shield, BUT it is in alignment on the outside with the fenders.

Any suggestion??? Is this an issue with fender alignment, core support alignment, bumper defect? or is this common even on factor original cars?

[Oldsguy]

I moved your thread into this forum. Better for future browsers as they may have a similar problem and find the solution in this thread, plus it keeps the newbie forum cleaned up.
Addressing your question, is it possible the stone shield is the culprit? If not, or you aren't sure, a few pictures sure would help.

[#1CutlassSupreme]

Originally Posted by Oldsguy

I moved your thread into this forum. Better for future browsers as they may have a similar problem and find the solution in this thread, plus it keeps the newbie forum cleaned up.
Addressing your question, is it possible the stone shield is the culprit? If not, or you aren't sure, a few pictures sure would help.

Thanks for moving the post. For some reason when I log in, it says that I'm only allowed to post in the Newbie thread. I thought maybe I was in trouble for something and got held back a grade.


Anyway, I thought it might be the stone shield too, but I've tried to re-align the whole front assmbly, but the the grille bolts, stone shield center bolt, trim aroung the headlights all seem to be lined up.

I'm thinking that it might be the fender alignment or a combination of the fender and the core support being off. The body shop lined them up prior to the front assmbly being finished and the bumper on. I'm thinking about just taking it in.

I'll work on getting some pictures. to post back in a few days and if I stumble on a resolution I'll post back my findings.

[Oldsguy]

If you are referring to the announcement in red near the top of the menu bar in the New Users Forum it is a general announcement, not to you specifically. If you still get some kind of other announcement that you are limited in your activities here let Omicron know and he will check it out for you, just send him a PM.

[2blu442]

This is John down in Medford Oregon. Yes if you can post some photos we can compare them to our cars and let you know what looks to be amiss. Have you been to Supercarsunlimited there in Portland? IMHO he's the best Oldsmobile guru in the Portland area.

[tdubis]

I also purchased a repro front bumper, mine came from the Parts Place. I have the same issue....The front points seem to stick out from the stone
shield, but line up on the sides. I assumed it was because there is some front end damage to the core support....where a deer struck the car. I was hoping when I get the lazy's out and finally replace my core support, which I have had for months, it would sort out the alignment issues. I will snap a few photos tonight and we can compare.

[scrappie]

Maybe if you have the original or an original and mock it up with that to see if it lines up?

[tdubis]

Does yours look like mine??

[Olds64]

I've heard it is very difficult to align body panels and bumpers if you don't have experience. Perhaps you could ask a friend that knows bodywork to help you out...