71 Cutlass

canucklehead · October 28th, 2007, 01:07 AM

I am in the process of swaping my 350 for a 425.Can I use the same pullys and brackets on the front of the motor for alt,p steering?
Does anyone have the brackets for sale?
Thanks

2blu442 · October 28th, 2007, 07:40 AM

Yes, I believe they will interchange. I may have the brackets and pullys, is it an AC car or not? Are you going to use the 1971 Power Steering pump and AC compressor? John

joe_padavano · October 29th, 2007, 09:45 AM

Quote:

Originally Posted by canucklehead

I am in the process of swaping my 350 for a 425.Can I use the same pullys and brackets on the front of the motor for alt,p steering?
Does anyone have the brackets for sale?
Thanks

The 68-76 accessory brackets are the same for big and small block. Toro used slightly different brackets. The thing to watch out for is the water pump and pulleys. The A/C pump is longer than the non-A/C pump and the pulleys go with it. Just be sure to use a matching set of brackets/pump/pulleys and you'll be fine.

October 28th, 2007, 01:07 AM	#1 (permalink)
canucklehead Junior Member Join Date: Feb 2007 Posts: 8	71 Cutlass I am in the process of swaping my 350 for a 425.Can I use the same pullys and brackets on the front of the motor for alt,p steering? Does anyone have the brackets for sale? Thanks

October 28th, 2007, 07:40 AM	#2 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Yes, I believe they will interchange. I may have the brackets and pullys, is it an AC car or not? Are you going to use the 1971 Power Steering pump and AC compressor? John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode