Roller Cam Kits

72RocketPower · August 9th, 2005, 10:38 AM

Does anybody make a roller cam kit for a 1972 455 with all the correct lifters, rocker arms, etc.?

texasred · August 9th, 2005, 09:16 PM

Ummmm...have you tried Dick Miller, Crane, Comp Cams, and the usual suspects? (Just stay away from M*ndell*) You can also try www.realoldspower.com. Lotsa racers and vendors hang out there.

C.J.

Oldsguy · August 11th, 2005, 05:51 AM

Bullet also grinds cams for Oldsmobiles. Lunati now has a cam grinder in their employ that was pretty well known over at R.O.P., he used to own his own company called Ultradyne but had to close down for personal reasons, it was a small company. His cams are well known and respected in the Olds community. Anyway, he now works for Lunati and supposedly his influence is being used there.

August 9th, 2005, 09:16 PM	#2 (permalink)
texasred Tom Servo's Stunt Double Join Date: Apr 2004 Location: San Antonio, Texas Posts: 824	Ummmm...have you tried Dick Miller, Crane, Comp Cams, and the usual suspects? (Just stay away from Mndell) You can also try www.realoldspower.com. Lotsa racers and vendors hang out there. C.J. __________________ Dad said, "Sometimes you read Job...sometimes you ARE Job!"

August 11th, 2005, 05:51 AM	#3 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 5,315	Bullet also grinds cams for Oldsmobiles. Lunati now has a cam grinder in their employ that was pretty well known over at R.O.P., he used to own his own company called Ultradyne but had to close down for personal reasons, it was a small company. His cams are well known and respected in the Olds community. Anyway, he now works for Lunati and supposedly his influence is being used there. __________________ Dan '77 Cutlass Supreme '46 2 door "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

August 9th, 2005, 10:38 AM	#1 (permalink)
72RocketPower Junior Member Join Date: Nov 2004 Location: Dallas, Texas Posts: 10	Does anybody make a roller cam kit for a 1972 455 with all the correct lifters, rocker arms, etc.?