|
I found the specs on the "stock" cam that I got with the car.
It's a NAPA cam (made by Dana)
Can someone translate this for me????? Is this an OK cam or not.
Attributes:
Advertised Duration (Exhaust):264 Deg
Advertised Duration (Intake):250 Deg
Cam Lift (Exhaust):.251"
Cam Lift (Intake):.250"
Cam Timing at .050" Lobe Lift (Exhaust Close):14 Deg Before Top Center
Cam Timing at .050" Lobe Lift (Exhaust Open):34 Deg Before Bottom Center
Cam Timing at .050" Lobe Lift (Intake Close):20 Deg After Bottom Center
Cam Timing at .050" Lobe Lift (Intake Open):13 Deg After Top Center
Degrees Overlap:36 Deg
Duration at .050" Lobe Lift (Exhaust):200 Deg
Duration at .050" Lobe Lift (Intake):187 Deg
Lobe Centerline (Exhaust):112 Deg
Lobe Centerline (Intake):106 Deg
Valve Lash (Exhaust):Hydraulic
Valve Lash (Intake):Hydraulic
Valve Lift (Exhaust):.402"
Valve Lift (Intake):.400"
Thanks!
|