ClassicOldsmobile.com - View Single Post

ohiyesa320 · 02-28-2007, 08:42 PM

Starting this morning, I have been having the same problem. I have full air from the blower, but it is no longer hot. At best it is luke warm. I first saw the thread from the 98 recommending using the "cut here" access panel. I tried that, but it looks like my door is stuck into the cold position, or my 2000 doesn't have a door. Also, the air that comes out of that open access panel when the car is running is still only luke warm.

My hands are too big to fit into the tiny access hole. I then poped down the Glove compartment, and both actuators are working for direction of flow, and AC. I don't see an actuator for the heat/cool adjustments. I am currently in Wolcott, Colorado (at 9000 feet) and it is COLD and SNOWY here. Any help would be appreciated.

02-28-2007, 08:42 PM	#5 (permalink)
ohiyesa320 Junior Member Join Date: Feb 2007 Posts: 1	same problem... Starting this morning, I have been having the same problem. I have full air from the blower, but it is no longer hot. At best it is luke warm. I first saw the thread from the 98 recommending using the "cut here" access panel. I tried that, but it looks like my door is stuck into the cold position, or my 2000 doesn't have a door. Also, the air that comes out of that open access panel when the car is running is still only luke warm. My hands are too big to fit into the tiny access hole. I then poped down the Glove compartment, and both actuators are working for direction of flow, and AC. I don't see an actuator for the heat/cool adjustments. I am currently in Wolcott, Colorado (at 9000 feet) and it is COLD and SNOWY here. Any help would be appreciated.