ClassicOldsmobile.com - View Single Post

2blu442 · 02-15-2007, 06:41 PM

68Delta88 We've talked before but I don't remember where your located. I've got some 425's but shipping an engine very far may cost more than the purchase price! I'm in Medford Oregon, SW part of the state 30 miles from the California border. I'm thinking I read that a 425 crank will fit in a 455 block. If that's true and you could come up with a 455 block local you could add the 425 steel crank, rods and pistons in a rebuild. Can anyone verify the 425 crank in a 455 block? John

02-15-2007, 06:41 PM	#5 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 805	68Delta88 We've talked before but I don't remember where your located. I've got some 425's but shipping an engine very far may cost more than the purchase price! I'm in Medford Oregon, SW part of the state 30 miles from the California border. I'm thinking I read that a 425 crank will fit in a 455 block. If that's true and you could come up with a 455 block local you could add the 425 steel crank, rods and pistons in a rebuild. Can anyone verify the 425 crank in a 455 block? John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!