|
The Body would be installed on the frame and then you'ld spray with the shutz gun, the Undercoating material on the under side of the body only where the Factory did for originality and sound deadening. You would spray this Material on the first coat at about 40 PSI. and then lower your pressure slightly so the texture starts to get thicker but but remains rather coarse. The Material for spraying is usually available in Automotive Paint Supply Stores in cans so all you have to do is screw on the Shutz Gun sprayer to the Cans, hook up your air line and start spraying. Try a small test area on an old piece of sheet metal over your head to practise, but don't forget to wear head and eye protection.
|