Quote:
Originally Posted by Oldsguy
Anyway, that's the way I have done it. Another option, rent a power blaster.
|
oooo...be careful of the power washer O wise Olds one... If the firewall has any type of rot at the area where it is welded to the floors, it will make for BAD JUJU and will make puddles on the floor. Learned the hard way on that one...Go for the elbow grease and a good stiff brush or a wire wheel on a drill or grinder. Will take longer but Oldsguy is right...you HAVE to get it clean. Another tip is just before you are ready to spray, go get a gallon of generic cleaning solvent from NAPA. It is fast drying and will take care of any extra greasy residue you may have missed....and for safety...use that outside or with a respirator and some nitrile gloves!!!!!
John