ClassicOldsmobile.com - View Single Post

connected100 · May 19th, 2003, 03:05 PM

If they are the same length tranies then just measure back from the end of the splined output shaft back to the center of your tranny mount. If there is any difference move crossmember accordingly. Hope this helps. Steve

May 19th, 2003, 03:05 PM	#2 (permalink)
connected100 Junior Member Join Date: May 2003 Location: Glencoe, Ontario Canada Posts: 2	If they are the same length tranies then just measure back from the end of the splined output shaft back to the center of your tranny mount. If there is any difference move crossmember accordingly. Hope this helps. Steve