lemoldsnut

I WILL PASTE ON HERE A LIST OF SOME OF THE PARTS I CURRENTLY HAVE FOR SALE. ALL ARE PLUS SHIPPING. I AM IN REDMOND, OREGON. EMAIL IF YOU HAVE QUESTIONS OR YOU CAN CALL ME DIRECT BETWEEN 8 AM AND 8 PM WEST COAST TIME

EMAIL lemoldsnut@aol.com


SCROLL DOWN TO SEE A MUCH MORE UPDATED LIST.

bigpink7752

I am looking for the center dash a/c vent for a 67 442. Cutlass, F-85, and Vistacruiser are all the same. There are 2 pieces, the metal core with 3 louvers and thumbwheel and the plastic encloser. Do you have this please?

lemoldsnut

I just sold one of these last week and I am not sure I have any more. I am very familiar with the part. I will check tomorrow for you.

lemoldsnut

I do not currently have any 66 bumpers or good 67 Cutlass fenders thanks for all who asked, That one on the list sold already.

SCROLL DOWN TO SEE UPDATED LIST

RAMBOW

Do you have a 66 hood- without the usual front lip rust?

Are you firm on the price on the 68 non headrest bucket seat cores?

RAMBOW

You're welcome.

lemoldsnut

No on the hood and yes on the seats

66cutlass400

Is the steering column for $175 a tilt column?

lemoldsnut

Yea that would be a fabulous buy huh? They are selling for up to $7-800 these days. Isn't that nuts? No it is a straight column. Thanks for asking. If you need anything else drop me a line.

Thanks
Larry
lemoldsnut@aol.com

steverw

do you have a good 67 442 auto, factory air, idiot light, (no tach), fuse box?
My fuse box is toast!!! broken and all the fuse spades are so rusty they will fall off if i breath on them. It seems anyone who makes new harnesses need the old fuse box, so i need a really good one

Thanks

Steve White

lemoldsnut

Steve,
I will look tomorrow. I don't know if I have any that are good. If you don't hear back in a day or so remind me. I am getting lots of emails and calls and sometimes forget but don't mean to.

Thanks
Larry

lemoldsnut

I had posted that I no longer had a left fender for a 67 Cutlass. I had it sold but that did not come together so I do have a nice left front fender off a 67 Cutlass, this is the same as 67 442 and 66 Cutlass and F85. So, if you previously asked for one check back. Thanks Larry

lemoldsnut

I do not have a good fuse box to sell at this time. thanks for asking
Larry

SnakeBit

looking for:

lower control arm, front, driver's side.
rear sway bar and control arms to mount it on.

would like pics of any trim you have, such as headlight, grille, taillights, drip molding chrome, letc. thank you.

lemoldsnut

PM sent

Would help if you complete your registration so when asking about parts shipping prices can be figured.

Thanks
Larry

lemoldsnut

OLDS PARTS LIST UPDATED 2/28/13
66 442 LEFT FENDER IN SEALER DIPPED FEW PIN HOLES $ 400.00,
67 CUTLASS/442 LEFT FENDER NO ROT $ 350.00,
3 66/67 LEFT DOOR HARDTOP SHELLS $ 150.00 EACH
66/67 RIGHT DOOR HARDTOP SHELLS $ 150.00 EACH,
66/67 LEFT QUARTER PANEL HAS BEEN DIPPED A FEW PIN HOLES AT THE BOTTOM $ 300.00
,66/67 RIGHT QUARTER PANEL ORIGINAL IN PAINT $ 400.00 (I HAVE A GREAT BODY FROM FIREWALL BACK WITH ROT FREE FLOORS, QUARTERS, WINDOWS TRUNK LIP) $1000
,66 LEFT INNER FENDER DIPPED IN SEALED PAINTED BLACK $ 200.00
1 66 RIGHT INNER FENDER DIPPED IN SEALED PAINTED BLACK $ 200.00
,66 CORE SUPPORT NICE NOT RUSTED LEFT MOUNT HOLE A LITTLE ENLARGED $ 200.00,
66 CUTLASS TYPE TRIM MOLDINGS NICE SHAPE EMAIL NEEDS FOR AVAILABILITY AND PRICING,
66 442 FRAME DIPPED PAINTED REBUILT SUSPENSION EMAIL
,SUPERTURBINE 300 TRANSMISSION ROAD TESTED $ 200.00,
66/67 AC PARTS EMAIL FOR SPECIFIC NEEDS HAVE TWO AC CARS I AM PARTING OUT,
66/67 POWER BENCH SEAT TRACK USED $ 200.00,
66/67 GAS TANKS GOOD USED $ 100.00 EACH,
REAR FRAME SECTIONS EMAIL AS NEEDED HAVE TWO FRAMES TO PART NO RUST,
66 FLOOR SHIFT STEERING COLUMN USED GOOD CONDITION $ 175.00 ,
66 AUTOMATIC CONSOLE WITH VACUUM GAUGE GLOVE BOX FLOOR NEEDS REPAIR OTHERWISE PRETTY NICE $ 450.00,
66/67 GLASS 2 DOOR AND 4 DOOR TINTED AND CLEAR EMAIL FOR PRICING,
66/67 BODY SIDE MOLDINGS 2 DOOR AND 4 DOOR CUTLASS/ 442 EMAIL FOR PRICING
3 14 X 6 EARLY STYLE RALLY WHEELS USED NO CENTER CAPS DRUM BRAKE STYLE $ 50.00 EACH
SUSPENSION PARTS EMAIL FOR PRICING
66/67 HEADLIGHT PARTS,
67 CUTLASS GRILL BARS USED $ 35.00,
67 TAILLIGHTS EMAIL FOR PRICING,
PARTING OUT 67 330 4 BARREL ENGINE USED BEEN SITTING LONG TIME EMAIL FOR info,
66/67 NON AC ENGINE BRACKETS EMAIL FOR PRICING,
66/67 AC ENGINE BRACKETS EMAIL FOR PRICING,
66/67 GLOVE BOX DOOR $ 65.00,
SHORT SHAFT TURBO 400 TRANSMISSION ALL CORES $ 125.00,
DOOR PARTS/VENT WINDOWS/LATCH ECT. EMAIL FOR PRICING,
PARTING OUT 1-67 2 DOOR HARDTOP,
1-67 4 DOOR HARDTOP,
2 66-442 HARDTOP
EMAIL FOR YOUR SPECIFIC NEEDS,
AC HEATER CONTROLS USED GOOD $ 150.00 AC PARTS ONE 66 CAR AND ONE 67 CAR EMAIL FOR PRICING,
68 TORONADO TRANS ROAD TESTED $ 125.00,
68 TORONADO FINAL DRIVE GOOD USED CONDITION $ 100.00,
PAIR C HEADS GOOD USED CONDITION $ 300.00,
PAIR 403 HEADS REBUILT STILL IN BAGS FROM BUILDER $ 350.00,
69 442 400 INTAKE AND CARB SET UP 253 CARB USED $ 450.00,
67 CUTLASS AIR CLEANER RED GOOD USED $ 50.00,
VARIOUS 455 ENGINES EMAIL FOR PRICING, ,
68 TORONADO REAR INTERIOR SIDE PANELS NICE PARCHMENT COLOR MANUAL WINDOW TYPE $ 60.00 PAIR,
67 CUTLASS SUPREME 4 DR ARM REST BENCH SEAT GOOD USED NEEDS REUPHOLSTERED CLOTH $ 100.00,
66 CUTLASS/ 442 AM RADIO NICE USED NO ***** $ 50.00,
68-9 442 G BLOCK 400 SHORT BLOCK, $850
67 RUST FREE AND TITLED BODY TUB. 2 DOOR HARDTOP $1000

IF YOU DON'T SEE WHAT YOU ARE LOOKING FOR EMAIL ME

THANKS
LARRY

danlf4

I'm in need of a 67 cutlass convertable frame...any help?
Please let me know....Dan
danlf4@verizon.net

lemoldsnut

I am not parting out any convertibles. I have two great rust free hardtop frames. one has been sand blasted, coated with por15 an top coated. It also has the front and rear suspension rebuilt. It is a real 442 frame.

Thanks for asking
Larry

silverfox

do you have a console and shifter for a 67 . do you have any 65 cutlass parts
bryce

mike63078

Any chance you have a 67 power sterring pump pulley? It would be stamped 382418

lemoldsnut

I currently do not have one for a non ac car. I believe that is what you are looking for. Thanks for asking. Larry

squirell

starter wiring from juntion to starter with good (factory tar type) insulation ?

lemoldsnut

Nope no hens teeth either. I haven't seen a good one of these in a long time. Have three crappy ones.

lemoldsnut

Just got in a left 67 442 headlight bezel $200
Some of the harder to get 67 cutlass supreme 442 moldings (just email what you need)

A few other 67 trim and 66 trim pieces,

Thanks
Larry
lemoldsnut@aol.com

lemoldsnut

Some added items 69 442 4 speed carb/intake set up complete for sale $500

70 olds 350 4 barrel running engine 4 speed motor (drilled for pilot bushing) $750

67 2 door hardtop body dry with no rot, solid quarters, window areas, rockers, floors, trunk lip all good and straight. $1000 with good title.

66 Olds 442 3:23 10 bolt posi rearend has been cleaned, painted, rebuilt, $1000 firm,

email

lemoldsnut@aol.com

squirell

Will you ship the rear ?
How fresh is it ?

lemoldsnut

I will strap it to a pallet and you can either have it picked up by a LTL carrier or I can drop it at Fastenal if you want that way.

It has no miles on it.

lemoldsnut

I had a few of you ask if I have the section of wiring that goes from the horn relay to the starter solenoid. I have several and they are almost all in very poor shape.

I contacted Greg Rollin at Supercars unlimited. He carries these new. Here is his reponse and contact information.

I do carry the horn relay to solenoid harnesses. For the 330 cars, it's
Part Number 38-148 and for the 400's it's Part Number 38-150.
Either runs $44.95. Both of course include the battery cable, the two
solenoid wires and connectors as well as the original style "asphalt
coated" sleeve.


Greg Rollin
Supercars Unlimited (Cutlass/4-4-2 is all we do!)
Beaverton, OR 503-641-1442
www.supercarsunlimited.com
email: greg@supercarsunlimited.com

Greg is a great guy and you actually get to talk with him. His years of knowledge about Olds cars is incredible. Give him a call.

Larry

lemoldsnut

HAD LOTS OF QUESTIONS THE LAST FEW DAYS. I UPDATED THE LAST LIST ON HERE JUST NOW HOPE THAT HELPS.

THANKS
LARRY

lemoldsnut@aol.com

squirell

Just picked up the 3:23 posi rear from the shipping company.
It looks to be as described by Larry.
No problems with his shipping (he knows the bussiness)
If it runs as good as it looks inside and out I feel I got a very fair deal.
Buy from him with confidence.
Thanx Larry

lemoldsnut

Thanks again for your purchase. I try very hard to be as up front as I can with all items.

Larry

squirell

As soon as I get some x-tra $$ we gonna have to talk about the 66 FLOOR SHIFT STEERING COLUMN and 66 AUTOMATIC CONSOLE WITH [GAUGE

lemoldsnut

Column has sold but still have the console

lemoldsnut

Thank a Vet for our freedom to enjoy this hobby of ours. Have a great memorial day

lemoldsnut

OLDS PARTS LIST UPDATED 05/28/13
66 442 LEFT FENDER (about 3-4 hours on it) BUT VERY USABLE AND NOT RUSTY $250
67 CUTLASS/442 LEFT FENDER NO ROT very nice $ 350.00,
3 66/67 LEFT DOOR HARDTOP SHELLS $ 150.00 EACH OR COMPLETE $250
66/67 RIGHT DOOR HARDTOP SHELLS $ 150.00 EACH, oR COMPLETE $250
66/67 LEFT QUARTER PANEL HAS BEEN DIPPED A FEW PIN HOLES AT THE BOTTOM $ 300.00
,66 LEFT INNER FENDER DIPPED IN SEALED PAINTED BLACK $ 200.00
1 66 RIGHT INNER FENDER DIPPED IN SEALED PAINTED BLACK $ 200.00
,66 CORE SUPPORT NICE NOT RUSTED LEFT MOUNT HOLE A LITTLE ENLARGED $ 200.00,
66 CUTLASS TYPE TRIM MOLDINGS NICE SHAPE EMAIL NEEDS FOR AVAILABILITY AND PRICING,
66 442 FRAME DIPPED PAINTED REBUILT SUSPENSION EMAIL
,SUPERTURBINE 300 TRANSMISSION ROAD TESTED $ 200.00,
66/67 AC PARTS EMAIL FOR SPECIFIC NEEDS HAVE TWO AC CARS I AM PARTING OUT,
66/67 POWER BENCH SEAT TRACK USED $ 200.00,
66/67 GAS TANKS GOOD USED $ 100.00 EACH,
REAR FRAME SECTIONS EMAIL AS NEEDED HAVE TWO FRAMES TO PART NO RUST,
66 AUTOMATIC CONSOLE WITH GAUGE GLOVE BOX FLOOR NEEDS REPAIR OTHERWISE VERY NICE $ .00,
66/67 GLASS 2 DOOR AND 4 DOOR TINTED AND CLEAR EMAIL FOR PRICING,
66/67 BODY SIDE MOLDINGS 2 DOOR AND 4 DOOR CUTLASS/ 442 EMAIL FOR PRICING
3 14 X 6 EARLY STYLE RALLY WHEELS USED NO CENTER CAPS DRUM BRAKE STYLE $ 50.00 EACH
SUSPENSION PARTS EMAIL FOR PRICING
66/67 HEADLIGHT PARTS,
67 CUTLASS GRILL BARS USED $ 35.00,
67 TAILLIGHTS EMAIL FOR PRICING,
67 330 CRANK $150
66/67 NON AC ENGINE BRACKETS EMAIL FOR PRICING,
66/67 AC ENGINE BRACKETS EMAIL FOR PRICING,
SHORT SHAFT TURBO 400 TRANSMISSION ALL CORES $ 125.00,
DOOR PARTS/VENT WINDOWS/LATCH ECT. EMAIL FOR PRICING,
PARTING OUT 1-67 2 DOOR HARDTOP,
1-67 4 DOOR HARDTOP,
2 66-442 HARDTOP
EMAIL FOR YOUR SPECIFIC NEEDS,
AC HEATER CONTROLS USED GOOD $ 150.00 AC PARTS ONE 66 CAR AND ONE 67 CAR EMAIL FOR PRICING,
68 TORONADO TRANS ROAD TESTED $ 125.00,
68 TORONADO FINAL DRIVE GOOD USED CONDITION $ 100.00,
PAIR C HEADS GOOD USED CONDITION $ 300.00,
PAIR 403 HEADS REBUILT STILL IN BAGS FROM BUILDER $ 350.00,
69 442 400 INTAKE AND CARB SET UP 253 CARB USED $ 450.00
VARIOUS 455 ENGINES EMAIL FOR PRICING, ,
68 TORONADO REAR INTERIOR SIDE PANELS NICE PARCHMENT COLOR MANUAL WINDOW TYPE $ 60.00 PAIR,
67 CUTLASS SUPREME 4 DR ARM REST BENCH SEAT GOOD USED NEEDS REUPHOLSTERED CLOTH $ 100.00,
66 CUTLASS/ 442 AM RADIO NICE USED NO ***** $ 50.00,
68-9 442 G BLOCK 400 SHORT BLOCK, $850 OR COULD MAKE IT A COMPLETE CARB TO PAN ENGINE FOR $1400
66-67 FACTORY AIR CONDITIONING CHANGE OVER. $850
67 FRONT BUMPER BRACKETS $80
66 425 very nicely built with bolt in valley pan, roller tip rockers, B heads, .30 over flat top pistons, has a crack in side of block with almost no miles on it. $1000 reblock it and you have a very nice motor.


IF YOU DON'T SEE WHAT YOU ARE LOOKING FOR EMAIL ME

THANKS
LARRY
lemoldsnut@aol.com

texxas

I'm looking for a passenger side manual window regulator for my 1967 Cutlass convertible. The channel that the glass sits in on mine is rusted out and the welds have failed that hold the channel to the rest of the regulator. A previous owner attempted to "fix" it with liquid nail. Thanks

lemoldsnut

Do you need it for the door or quarter glass? Also, is the channel you need the one attached to the glass? A picture helps too. You can email me a picture to lemoldsnut@aol.com and I will check. I might have what you need. Thanks Larry

texxas

Larry, it's the door. The channel is the one attached to the bottom of the glass, you are correct. I'll have to pull my door panel to get pictures. It's currently assembled so I can drive the car. The glass still goes up and down just fine. The glass doesn't fit into the weather strip with the window fully rolled up because of the disconnected channel. It rolls up out side of the weatherstrip at the top. You have to give it a little push from the outside to seat it in place with the door closed and you wouldn't want to close the door with the glass fully rolled up first. I'll need a week or two to get pics. I'm pretty busy, lately. Hope you can help me out. Thanks, David

lemoldsnut

I sent you a pm texxas I have what you need.

Thanks
Larry

texxas

I'd just like to say that I would buy parts from Larry anytime. The parts I received are in great shape. They look about 2 years old not 46. Shipping was fast, communication great and packaging was done carefully. Thanks so much Larry.