I need a little information from some of you older motor heads. I am building a 1950 Olds 303.7 motor to put in a 1934 Chevy coupe. The block has been bored .040 over
and I will be running an Edmunds 2 duce
intake with twin Rochesters. I have installed a "3/4" race cam. I have heard that I have to
change the rocker arms and install adjustable pushrods. The valve train on a
50 Olds motor is non-adjustable (rocker wise) and the stock push rods are not adjustable. Any info welcome.
|