jerrybetty5

I had the original clock in my 69 442 rebuilt. Clock was installed and worked for about 30 seconds and stopped. Anyone have any ideas what could be wrong? It lights up but that's it.

mrolds69

Lighting up means nothing, it's a different circuit. Check your fuses. Was it a quartz rebuild?

jerrybetty5

No, opted not to convert it.

mrolds69

I see...bad move in my opinion, and here's why. The clock has points in it like ignition points that open + close every 5 mins or so. They were supposed to be serviced like every few years, if not they mess up. All my cars are quartz, my 69 442 clock was 16 years ago and no probs. Check the fuse or check the clock power wire with a test light, that will tell you something.