[and1stp]

Polarizing my generator. I need to place a jumper wire between the GEN and BAT leads on the voltage regulator. I have no markings on the regulator. Looking at the regulator I have 3 leads(post). The first one (Red) goes to battery. Second lead (middle post) looks like same wire that goes to the generator (wire goes into wire harness). Third post not sure where this goes.

To make sure, Is post 1 the BAT and the 2nd post GEN?

Never owned a car with a generator, and discovered this proccess by chance.

Thanks,
And1stp
'55 Olds 88