|
This unit has a large flange secured with six 12point bolts. Two of the u-joint caps bolt into the flange and are triangular in shape and the bolts come in from the back of the flange. This afternoon I found a u-joint but after looking at the flange I find I'll need to replace it.
The flange is approx. 6 1/16th" in diameter and 5/8th" thick. It has 6 holes around the outer edge, and has a machined 5" locating flat on the back side. The center has a machined opening approx. 2.25" X 3.75" with 2 holes on each long side for the u-joint caps. This is definately not a CV system.
The u-joint is a spicer 5-356X and shows dicontinued in the computors. By chance, someone remembered a small driveline shop that the owner used to do Toronados and Eldos and I found an 80+ year man who who went right to the back and pulled it out. Say's "that's it, got no more!" The box is real OLD.
|