|
I'm a member on a Chevy truck forum. The guys over there usually just cut the bracket in half, drill out the spot welds on one half, move it out wider and re-weld it. Then you would need the 4 core rubber mount. I believe they move the side towards the engine back. Others weld in the aftermarket brackets already mentioned.
I asked about a 4 core radiator for my 67 CS project car, none was available. But they could re-core my existing radiator to 4 core. That wouldn't have required different mounts. I know, you already have the radiator. Just posting for anyone else considering this. And I didn't get a radiator with the project car so I bought a 3 core.
You might want to decide what to do about the top plate issue before you tackle the bottom mount.
Don
|