The spring pocket and the lower control arm collides - to get lower more cutting is required!
Trim...
Looks better.
Some clearence - almost ½".
14" rim...
Marked the cut-out on the left side.
Trimmed.
Took out the lower control arms to make bag mounts.
A thick plate.
Drilling 2 new holes in the lower contol arm, I also use the hole for the swaybar linkage so the plate will be mounted with 3 bolts.
Like this.
With the bag mounted.
Bag mounts for the rear axle.
The rear bags were a peace of cake, no modification of the car at all needed, just replace the old coil-springs.
Bag mounted on teh left side in the front.
And the right side.
High!
Low!