|
I still suspect a spark problem...since it has HEI are you sure the distributer has a full 12 volts to it? To convert a points dist to an HEI you cannot simply use the resistor wire from ignition switch to the coil and connect it to the HEI. You should also check the carbon button inside the distributer cap.
__________________
OCA Member 2587
'59 98 conv.
'66 Starfire
'66 Delta Fact.4spd
'66 Delta conv. times 2
'67 442 conv.
'68 Cutlass conv.
'70 Rallye 350
'92 Custom Cruiser
|