|
Get Yourself A Da Sander With Some 80grit Paper Use A 6 Inch Pad, After The Car Is Down To Primer Or Bare Metal Go Over It With 220, Then You Can Use A Sealer On The Car, Do Your Body Work And Then Prime The Car With A Good Urethane Primer. Block The Car Out By Hand With 320 Or 400 And Squirt The Color. Good Luck. Oh About The Floors, If You Can Find The Replacement Metal Try The Structural Adhesive Made By 3m Or Fusor, The Stuf Is Just As Strong As Welding . I Have Seen Alot Of Guys Mess Up Some Good Sheet Metal If They Dont Know How To Weld. Good Luck Man.
|