Quote:
Originally Posted by Chumley
I just got a new (rebuilt) master cylinder with the two bleed screws on it. Can I "bench bleed" it with it installed on the car? What is the procedure using these screws? ( I don't have a vise or a bench) Thanks, chumley  |
If the M/C has bleeder screws, you don't need the bench bleed kit. That's for M/Cs that don't have bleeder screws and thus includes fittings to screw into the M/C ports. In your case, simply connect a piece of vacuum tubing from the bleeder nipple back into the reservoir.