Quote:
Originally Posted by 70Wcars
I would check with Terry at FCR Performance and with Bullet Cams for advice on your combo. Both companies can make recommendations as well as sell you a cam and any related valve gear you may need to go with it.
On the carb issue, I have cores that I rebuild and I have some ' 73 as well as the later '70s vintage carbs that flow 800 cfm. All of my builds are done one at a time for each particular engine/drivetrain combo. I re-bush the throttle shafts as well. Settle on a cam and exhaust and Converter choice and then we can narrow down which way to go with the carb.
Danny
|
PM me with prices if you will so I can figure it into my build. After I rebuild the 400th, I will only have 3600 (hoping that in some math problem this will equal close to 400HP) to do this motor and exhaust (which will cost about 300), so I guess I'm down to 3300. This will all go done Jan/ Feb time frame. Thanks.