|
455 motor don't know what it is out of or yr
Going into what was a Cutlass conv. when we drove it in and driving out a 442
Power steering
I have both pumps(saginaw and one with round resivor and oval neck) and two sets of brackets one pump was bolted to each
No spacers on P/S brackets
Looks like one goes between the brackets and betwwnthe back half of the bracket and the timing cover
Can you tell me the lentghs and dia. of these and are suppost to be more
Two different alt. brackets---
1. goes over the valve cover and ties to the bottom section which attaches to the head bolt and looks like it needs spacers behind it to bolt to the head
2. bolts to the head and intake(top half) and exhaust front hole, P/S bracket and has a long skinny bracket that comes off the front hole on this bracket
Cast A/C brackets--half goes over the vavle cover and half bolts to the head
Have the front and rear brackets for the A-6 compressor
Thanks again Rick
|