ClassicOldsmobile.com - View Single Post

Tim 78Skylark · 09-23-2007, 02:27 PM

There is a junction block under the master cylinder. It has an 8mm bolt through the middle of it. Take this out and unclip the harness. You can remove the engine with the harness on it.

09-23-2007, 02:27 PM	#3 (permalink)
Tim 78Skylark Tim 78Skylark Join Date: Sep 2007 Location: Mt. Juliet, Tn. Posts: 1	There is a junction block under the master cylinder. It has an 8mm bolt through the middle of it. Take this out and unclip the harness. You can remove the engine with the harness on it.