ClassicOldsmobile.com - View Single Post

72rocket · 09-22-2007, 10:42 PM

I just pulled the support beam that goes from the front fender (by the side marker) to the frame and drilled out the rivets holding this rubber/fabric material to the beam so I can strip/paint the beam. The rubber/fabric stuff is trashed and I'm wondering if anyone has had experience getting this new material or maybe an idea on a thick rubber sheet I can cut to size to replace it. I'm just going to use a nut, bolt, and washers instead of the rivet to reattach it so that's easy.
Any help would be great.

09-22-2007, 10:42 PM	#1 (permalink)
72rocket Junior Member Join Date: Jul 2007 Location: Vandenberg AFB, CA Posts: 16	Front fender to frame mount question I just pulled the support beam that goes from the front fender (by the side marker) to the frame and drilled out the rivets holding this rubber/fabric material to the beam so I can strip/paint the beam. The rubber/fabric stuff is trashed and I'm wondering if anyone has had experience getting this new material or maybe an idea on a thick rubber sheet I can cut to size to replace it. I'm just going to use a nut, bolt, and washers instead of the rivet to reattach it so that's easy. Any help would be great. __________________ 1972 Cutlass Supreme 2000 Ford Lightning (12.72, 1/4 mile)