ClassicOldsmobile.com - View Single Post

Olds64 · 09-22-2007, 06:10 AM

Big Al, regardless of what old transmission you have if you decide to change to a new tranny then there is plenty of info out there. There are a few posts here on Classic Olds that are on the subject.

http://classicoldsmobile.com/forums/...94-1962-a.html

I believe there is a company called Tanson that makes an adapter for the 394 to adapt it to "modern Chevy bellpatterns." You also might check out the following article, I didn't read it but I found it with a simple search on the internet.

http://www.streetrodderweb.com/tech/...mission_swaps/

Also, check out the following website. If you are going to swap to a modern overdrive tranny then you will need to install a throttle valve.

http://www.tvmadeez.com/

Good luck, and keep the questions coming.

09-22-2007, 06:10 AM	#15 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,334	Big Al, regardless of what old transmission you have if you decide to change to a new tranny then there is plenty of info out there. There are a few posts here on Classic Olds that are on the subject. http://classicoldsmobile.com/forums/...94-1962-a.html I believe there is a company called Tanson that makes an adapter for the 394 to adapt it to "modern Chevy bellpatterns." You also might check out the following article, I didn't read it but I found it with a simple search on the internet. http://www.streetrodderweb.com/tech/...mission_swaps/ Also, check out the following website. If you are going to swap to a modern overdrive tranny then you will need to install a throttle valve. http://www.tvmadeez.com/ Good luck, and keep the questions coming.