Quote:
Originally Posted by Oldsguy
I am going to have to address this issue in my application. The TH400 came from a '69 Delta 88 that used the wheel speedo so there is a hole in the side of the transmission case for that. However the transmission is now in a '46 Olds and I am going to have to find a way to drive the speedo, or go without it and cover the hole so I don't loose all the fluid!
Glad this post came up because I didn't think about that earlier..........there is always something left undone.
|
Dan,
Not sure I completely follow your question. If the trans has the opening for a speedo cable fitting, just get one and bolt it in. If the trans has a plug in the hole, knock it out and install the drive gear as I noted above. If there is no opening, you're SOL.