Quote:
Originally Posted by Oldsproject
........ I'm marking every piston at TDC with a gauge ........
|
what type gauge are you using and how is it set up?
Quote:
|
........ do I have a 45 degree or 39 degree cam bank ........
|
Didn't your shop verify the angle, before they ordered your cam?
Quote:
|
........ am I screwing it up or are the readings OK?
|
If the cam were correctly ground, the numbers would be the same for all cylinders on the same bank, regardless of the lifter angle.
Odds are, the cam was ground correctly.
Norm